PRODUCTS FILTER ELEMENTS THE SOLUTION PROCESS CASE STUDIES WHITE PAPERS FAQs TIPS GREEN TIPS ABOUT FILTER WORKS CONTACT FILTER WORKS SITE MAP HOME VIEW CART     Auto-Small Truck Systems   RV, Utility and Semi Truck Systems   Agriculture-Construction Systems   Portable Unit Systems   Stationary Unit Systems   Filter Elements   Oil Recycling Systems   Water Recycling Systems   Vacuum Filtration Systems   Hydraulic Product Systems   Oil/Water Separator Systems

STATIONARY UNIT SYSTEMS     Model 265VP, Two C- 1000 Housing, Vacuum Pump System   Vacuum pump oil filtration is inexpensive compared to the cost of repairing or replacing a vacuum pump. Additionally, vacuum pump oil has no additives. You do not have to add additive packages to your vacuum pump oil after filtering. Additives will reduce the performance of the vacuum pump by raising vapor pressures and absorbing moisture. Using the proper fluid and filtering that fluid on a regular basis will provide you the lowest possible pressure with a minimal amount of repair. Additionally, during the pump down process, contaminants will enter the air chamber, mix with air and cause the oil to oxidize and form sludge.    Application Vacuum Pump   5 GPM Pump 3/4 HP Motor 1 PH ( 8 & 11 GPM Pump also available) Cat #: 65025  Price: $3,672.00      Qty:      Vacuum Pump Element Cat #: 6534VP  Price: $292.00      Case price- 4 per case Qty:    If you are not utilizing dedicated filtration on your vacuum pumps you may be experiencing the following problems: Dropping vacuum pump efficiency Sludge build-up in your vacuum pump oil Improper oil in your vacuum pump Decreased vapor pressure Excess moisture Pump failure Solution: Particulate contamination does not mean that the vacuum pump oil must be disposed of and replaced. Through multi-pass filtration, the particulate can be removed from the vacuum pump oil and thus the life of the oil and the vacuum pump can be increased. Both fine and gross contamination can be removed through the use of multi-pass filtration. ThisFiltration will reduce sludge build-up, impurity contamination and increase the vacuum pump’s efficiency. Standard Features Included: 1, 3 or 5 GPM Gear Pump (Fluid Flow Determined By Fluid Viscosity) Inlet Wye Strainer Pressure Relief Valve 14 Gauge Steel Housing Stainless Steel Element Lifter Motor Rated On/Off Switch 115 VAC 60HZ TEFC 1725 RPM Motor 0-100 PSI Pressure Gauge W/Vent Valve Freestanding Frame Continuously Filter Fluid in Reservoir Other Options Available: Motor in any Voltage or Phase Additional Pump (Centrifugal or Air Diaphragm) Stainless Steel, Chrome Plated, Black Powder Coat or Electro-Polished Finish Key words: vacuum, Vacuum pump